How to add height to metal table legs?

Adding height to metal table legs is a relatively easy process that can be completed in a matter of minutes. The most important thing to keep in mind when performing this task is to make sure that the legs are level with each other before beginning. Additionally, it is important to measure the height of the table legs before beginning the process so that you know how much height needs to be added.
The first step in adding height to metal table legs is to find something to use as a spacer. This can be anything from a block of wood to a stack of books. Once you have found a suitable spacer, place it underneath one of the metal table legs. Make sure that the spacer is level with the other leg before proceeding.
Next, take a measuring tape and measure from the top of the spacer to the top of the metal table leg. This will give you an accurate measurement of how much height needs to be added. Once you have this measurement, proceed to the next step.
Now, take a piece of metal tubing that is slightly longer than the measurement you just took. Cut the tubing to the appropriate length and then slide it over the metal table leg. The tubing should fit snugly over the leg, but should not be so tight that it is difficult to remove.
Finally, use a piece of duct tape to secure the tubing in place. Be sure to wrap the duct tape around the tubing a few times so that it is firmly attached. Once the duct tape is in place, your metal table legs should now be the same height.


Leave a comment