How to attach casters to hollow metal legs for table?

You will need:

- Casters (4)

- Hollow metal legs (4)

- L-brackets (4)

- Drill

-1/8 inch drill bit

-1/4 inch drill bit

- Screws (8)

- Washers (8)

- Lock washers (8)

- Nut (4)

1. First, take one of the l-brackets and attach it to the bottom of each leg using screws. It is important to use washers and lock washers with the screws to prevent the bracket from coming loose over time.
2. Next, drill a hole through the center of each bracket using a 1/8 inch drill bit.
3. Then, take the casters and place them over the holes in the brackets.
4. Drill a hole through the center of each caster using a 1/4 inch drill bit.
5. Finally, attach the casters to the brackets using screws and nuts. Be sure to tighten the nuts securely.