How to glue metal leg to glass table?

How to glue metal leg to glass table
If you have a glass table with a metal leg, you may be wondering how to glue the leg to the table. There are a few things to keep in mind when doing this, and following these tips will help ensure that your leg is properly glued to the table.
First, it is important to clean both the leg and the table surface where the leg will be glued. Any dirt or debris on either surface can prevent the glue from adhering properly. You can use a cloth or paper towel to wipe down the surfaces.
Next, it is time to apply the glue. There are a variety of adhesives that can be used for this purpose, but we recommend using an epoxy. You can apply the epoxy directly to the leg or to the table surface; just be sure to apply it to both surfaces if you are using the table surface. Once the epoxy is in place, you will need to position the leg so that it is touching the table surface.
Finally, apply pressure to the leg to ensure that it is touching the table surface. You may need to use clamps to hold the leg in place while the glue dries. Once the glue is dry, your leg should be securely attached to the table.