How to make metal legs for a tree slab table?

If you have a tree slab table that needs metal legs, there are a few things you'll need to do in order to make them. First, you'll need to find some metal legs that will fit the dimensions of your table. Once you have the legs, you'll need to attach them to the table using screws or nails.
If you're using screws, you'll first need to drill pilot holes into the tree slab. Be careful not to drill too deeply, as you don't want to damage the tree. Once the pilot holes are drilled, you can screw the legs into place. If you're using nails, you'll need to hammer them into the pilot holes.
Once the legs are attached, you'll need to level the table. This is especially important if your table is going to be used for dining. Use a level to make sure the table is even on all four sides. You may need to adjust the legs until the table is level.
And that's it! Your tree slab table now has metal legs and is ready to be used.


Leave a comment