How to make metal pipe legs for table?

If you're looking for a stylish, yet sturdy way to support your tables and desks, metal pipe legs are a great option. They're easy to make yourself with a few simple tools and materials, and they can be easily customized to your desired look and finish. Here's how to make metal pipe legs for a table or desk.

  1. Choose your pipes. Metal pipes come in a variety of sizes, thicknesses, and finishes. For a sturdy table or desk, choose pipes that are at least 1" in diameter and 18-gauge (1.2mm) thick. You can use thinner pipes for a smaller table or desk, but keep in mind that they may not be as sturdy. If you're unsure which size or thickness to choose, ask a sales associate at your local hardware store for guidance.
  2. Cut your pipes to size. Using a pipe cutter, cut your pipes to the desired length. If you're making legs for a square or rectangular table, you'll need four pipes of equal length. For a round or oval table, you'll need three pipes of equal length.
  3. Sand the edges of your pipes. Since metal pipes can be quite sharp, it's important to sand the edges so they're not too sharp or jagged. You can use a handheld sander for this, or sandpaper wrapped around a block of wood.
  4. Paint or finish your pipes. If you want your metal pipe legs to have a certain finish, now's the time to paint or finish them. You can use spray paint, a brush-on paint, a patina, or any other type of finish. Just be sure to use a paint or finish that's meant for metal surfaces.
  5. Attach your pipes to the table or desk. Once your pipes are the desired length and finish, it's time to attach them to your table or desk. If you're using a square or rectangular table, you'll need to drill four holes in the table, one at each corner. The holes should be slightly larger than the diameter of your pipes. For a round or oval table, you'll need to drill three holes, spaced evenly around the perimeter of the table.
Once you have your holes drilled, simply insert your pipes into the holes and secure them with screws. You may need to use washers to ensure a tight fit.
And that's it! You've now made your very own metal pipe legs for a table or desk.

Leave a comment