How to solder metal table legs back to table?

If your metal table legs have come detached from the table, don't despair - they can be reattached with a little bit of soldering. This process is relatively simple and only requires a few tools and materials that you likely already have around the house. Once you've reattached the metal legs to the table, your table will be as good as new!
Here's what you'll need to do the job:

- Soldering iron

- Solder

- flux

- Wire brush

- sandpaper

- Metal table legs

- Table

First, clean the area where the metal legs will be attached to the table with a wire brush. This will help the solder to adhere to the metal. Next, apply flux to the area where the legs will be attached. Flux helps the solder to flow and allows it to adhere to the metal better.
Now, it's time to heat up the soldering iron. Once it's hot, touch the tip of the iron to the area where the flux is applied. Then, touch the solder to the hot iron and apply it to the area where the flux is. The solder will flow into the area and attach the metal legs to the table.
Allow the solder to cool for a few minutes before moving the table. Once it's cooled, your table should be good as new!